Window ACs are one of the most popular and highly used appliances in a home. However, like all appliances, they can become dirty over time. In this blog post, we will teach you how to clean window AC coils. By following these tips, you will be able to keep your AC running smoothly and avoid any unnecessary repairs. Plus, it’s a great way to keep your home environment comfortable and clean.
What You’ll Need
What You’ll Need
- Phillips head screwdriver
- Large towel
- Cleaning agent of choice (a window cleaner, vinegar, soap, etc.)
- Soft cloths
- First, make sure the power to your AC is off by flipping the breaker switch. If you do not have a breaker switch, unplug the AC cord from the wall outlet.
- Disconnect the electrical wires that go to your AC unit.
- Use a screwdriver to remove the screws that hold the window frame in place. Gently pull out the window frame and set it aside on a soft surface.
- Carefully pull out all of the wires that go into and come out of the air conditioner unit. Cut each wire as close to the unit as possible with a Phillips head screwdriver before removing it completely.
- Pour a generous amount of cleaning agent into a large towel and ring it out so that it is slightly damp but not wet. Wring the towel several times to get rid of excess liquid and then use it to wipe down all surfaces outside of the AC unit including the bottom, sides, top, and front grill/sensor cover. Be sure to get into any grooves or crevices where debris may accumulate.
- Repeat Steps 3 through 5 until all surfaces have been cleaned well. Once everything has been wiped down, use a soft cloth to dry everything off completely before
If you’re experiencing any problems with your window air conditioner, it’s time to call a professional ac repair service. At fastrepaircare.ae, our team of experts can help you clean the coils and ensure that your unit is running smoothly once again.
We offer a range of services that include coil cleaning, ac maintenance, and more. So if your AC is giving you trouble, don’t wait – call us today!
How to Clean the Coils
Window air conditioners typically work by circulating indoor air through metal coils located on the outside of the unit. These coils are either in direct contact with the window or mounted on a bracket that rests against it. Over time, dust, dirt, and other particles can accumulate on these coils, which can lead to poor cooling performance and even AC unit failure. Here are four tips for cleaning your window AC coils:
1. Remove the unit from the window: Before beginning any coil cleaning, you first have to remove the AC unit from the window. This may require removing screws or hinges that secure it to the frame. Once removed, you can use a vacuum cleaner and/or a hose attachment to remove all debris and dirt from the coils.
2. Use a degreaser: If degreasing is not an option because of surface damage (e.g., rust), then you can use a commercial coil-cleaning solution such as Guaranteed No-Fault AC Coil Cleaner. Simply spray a small amount of cleaner onto a cloth and wipe down each coil until clean. Be sure to rinse off all product residue before reinserting the AC unit into its bracket or back into your window.
3. Use a brush: If degreasing is not an option due to surface damage, then you can try using a brush instead. Wet one end of the brush in water and apply pressure while scrubbing across each coil until clean. Again, be sure to
Tips for Cleaning the Coils
Window air conditioners have coils that get dirty over time. Here are some tips for cleaning them:
-Before cleaning, turn off the AC and disconnect the power cord from the unit.
-Wash the exterior of the coil in a bucket of water using a nonabrasive brush. Make sure to get into all the nooks and crannies.
-Rinse well with clean water and dry off completely.
-If there is grime or dried sweat on the inside surface of the coil, use a hose to spray water onto the coil from several directions. Agitate and rinse thoroughly with clean water.
-Apply a thin layer of CRC anti-static spray to one side of a clean, lint free cloth and wipe the coil clean. Apply more spray if needed to avoid sticking. Be careful not to remove any dirt or debris from around the edges of the grill.